RADWAG BloggerRADWAG FacebookRADWAG RSS
 
Measuring indicator PUE 5

1 year
warranty period

Application:

Weighing terminal series PUE 5 is a multifunctional weighing device. It is equipped with a 12,1’’ display with touch screen. It combines the best features of a PC computer and a scale. The PUE 5 terminal operates on basis of Windows XP system. Such solution is the best option for configuring the device to individual customer requirements through installing corresponding application.

If applied with dosing or formulation systems, the PUE 5 allows for operation with many weighing platforms, and simultaneous dosing with full control process. A dosing and formulation system that is configured on basis of PUE 5 terminal does not require additional PC computer. Data base editing is possible from the level of PUE 5 touch screen or an optional PC keyboard.

Utilization:

Main applications for PUE 5 weighing terminal are:

  • Construction of industrial load cell scales;
  • Application on broad weighing systems supervised by a computer system through Ethernet module;
  • Possibility of connecting large quantity of additional weighing platforms to a weighing terminal
 

Design:

A PUE 5 weighing terminal is built into a waterproof casing manufactured in stainless steel technology for operation in hard industrial conditions (dust and humidity). Thus, the terminal is resistant to disinfection detergents while cleaning. PUE 5 weighing terminal is equipped with 12,1" colored active matrix of graphic display with resolution 800×600 pixels, which provides very good readability on various angles. Operating the terminal is possible through a touch screen (the front panel of the terminal is not equipped with a keyboard). It makes the operation and full utilization of the terminal features very intuitive even for a non-trained personnel. The functionality of the terminal matches the one present in modern computer systems. Depending on type of installed touch screen, the user can reach expected IP rating. Panel applying infrared technology allows for reaching highest IP rating, i.e. IP 67, and a resistance panel offers IP 65 protection rating.
The PUE 5 terminal can be supplied from alternating current 88-264 V, 50-60Hz. As standard the terminal is offered with: RS232, RS485, Ethernet, 2×USB 2.0, 4 in / 4 out.
The PUE 5 terminal can contain up to two weighing modules with possibility of connecting additional platforms. Power A / D converter on the weighing module +5 V (one module as standard).

 

A Scale and a Computer in one:

PUE 5 weighing terminal is an original device containing a computer and a weighing module in one casing. Both components are connected through internally installed interface. The weighing module is fully functional scale with non-volatile memory attached to the module, and no display.

Apart from standard interfaces, it is possible to extend the features of the terminal by additional modules: 8 in / 8 out WE8, additional weighing platform module MW-02 and Profibus module.
The terminal can be extended by external modules for dosing and weighing, which can have autonomic supervision the dosing process.


There is also a possibility to connect peripheral devices to the terminal. The devices are: barcode scanner, transponder card scanner, receipt and label printers, additional display and other devices connectable through USB port to standard PC computers with corresponding drivers being installed.

 

Software:

The terminal has a basic application installed in it which operates weighing module and functions as display and control desk for the scale.
Depending on requirements, the terminal can be equipped with one of below specified weighing system offered by RADWAG:

 

Optional equipment:

Download:

 

 
Technical information: PUE 5
Casing stainless steel
IP rating IP67
Screen LCD 12,1" (800x600) touch screen
Power supply 85-265 VAC 50-60Hz
Power supply of external devices 2×5 V 500 mA
Power consumption 45W
Working temperature work: 0°C ÷ +40°C, storage: -20°C ÷ +60°C
Maximal quantity of divisions from converter 8 388 608
OIML Class III
Maximal quantity of verifying units 6 000
Maximal increase of signal 19 mV
Maximal voltage on 1 verifying unit 3,3 µV
Minimal voltage on 1 verifying unit 1 µV
Minimal impedance of load cell 90
Maximal impedance of load cell 1200
Power voltage of load cell 5 V
Connection of load cells 4 or 6 cables + screen
Procesor Intel® Atom™ N270 1.6 GHz
Chipset Intel® 945GSE, Intel® ICH7M
RAM memory 2 GB
Data memory HDD 80 GB ATA
Graphic card memory max. 224 MB DVMT 3.0
Ethernet 10/100 Mbps
Optoinsulated interfaces RS 232C, RS 485
USB interface 2 x USB 2.0 (max. intensity 500mA)
In/out (optional) 4 in, 4 out
Operating system Microsoft Windows XP Embedded SP2
Net / gross weight 9/10 kg
Shipping dimensions 470×350×250 mm
Accessories:
Kafka thermal printerModule AN
Dot matrix Epson printerModule Profibus DP-V1
Label printer CitizenCable RS 232 (scale - Kafka printer) "PT0018"
E2R Weighing recordsCable RS 232 (scale, Epson , Citizen printer) "PT0019"
E2R TransactionsCable RS 232 (DB9) "PT0094"
E2R FormulasCable Ethernet (scale - ethernet) "P0198"
Transonder card scanner: CK-01USB converter "PT0084"
Bar code scannerCable USB (scale - Epson and Citizen printer) "PT0087"
Module WE8 
Please click entry from additional equipment list to see details.
©2005 RADWAG Wagi Elektroniczne. All rights reserved.
All proprietor's rights do the materials placed in the server are in possession of RADWAG Wagi Elektroniczne and are
not to be copied, processed and utilized in commercial purpose unless agreed with RADWAG Wagi Elektroniczne.